Does your garage door make a noise when opening? Garage doors that are not regularly maintained and lubricated can become noisy and eventually stop working. One of the best ways to quiet your garage door and extend its life is to lubricate it every six months. This frees up the door’s range of motion and makes it easier for the opener to open and close the door. If you’re wondering how to lubricate your garage door, keep reading!
We recommend reading the article apple homekit garage door opener.
Preparatory work
Source: wcmanet.org
Before you lubricate your garage door, you need to perform some important maintenance tasks. Here’s a quick list of things to do before using garage door lubricant. Tighten every part of your garage door. Make sure the nuts and bolts are tight but don’t over-tighten them. Also, check for worn parts and replace them if necessary. Check the rollers. Most rollers have unsealed bearings, where dirt accumulates and they become damaged over time. When the rollers become damaged, they wobble in the rail and cause noise. Check the hinges. Worn hinges can be noisy and cause the door to bind in each section as it opens. Tighten the garage door opener chain. A loose chain will make banging sounds and cause the door to jerk. Next, make the right choice of garage door lubricant. Once you have performed these basic maintenance tasks, you can start lubricating the garage door.
Garage door lubricant – how to choose properly?
You may be wondering how to lubricate your garage door, but it all starts with choosing the right product. Look for silicone sprays or white lithium grease when choosing a garage door lubricant. Aerosols are the best option when it comes to injecting grease into small moving parts. Standard degreasers, mechanical grease, and motor oil are prone to dirt and dust accumulation, so avoid these products. Spray silicone – these products usually come with a long, thin straw to keep the spray in place. These attachments are also helpful when it comes to getting lubricants into small spaces. Silicone products are durable and behave at different temperatures. White lithium grease – this product is applied by hand, so it’s a bit messier than aerosols. However, this means that it is easier to spread evenly. White lithium grease is made of soap and oil, so it is non-corrosive and adheres well to metal.
How to lubricate the garage door?
Source: sofalvidoorsystems.com
Not sure how to lubricate your garage door? The most important thing is to be thorough and make sure you have all the moving parts. Follow these step-by-step instructions to lubricate your garage door. Close the garage door and turn off the power to the opener (if you have one). Wipe the inside and outside of the guides with a damp cloth to remove dirt and debris. Never use grease on the guides, as this impedes the movement of the rollers and forces the opener to work harder. If you have trouble cleaning the g uides, you can use car brake cleaner to loosen the dirt. Open the door and lubricate each of the hinges where they meet the rail bend.
Thoroughly lubricate the rollers, including the small ball bearings inside each roller. Remember to wipe off any excess grease to keep the door from becoming unbalanced. Most importantly, never lubricate nylon rollers. Lubricate the springs and bearing plates at the top of the garage door. Make sure you open and close the door to distribute the grease evenly. Lubricate the arm and lock (if you have one) to make it easier to close the door by hand. Remember to also lubricate the keyhole and the large stick on top of the door. Lubricate the top of the rail (where the chain rides) and spread the lubricant around it with a cloth. You don’t need to lubricate the chain as it already has a natural lubricant.